Infrastructure Available at RIU
Research Drone and Training Drones
Product Description
The Pixhawk 4 S500 V2 Basic Kit is the perfect way to get started developing on Pixhawk 4 . It pairs a 480mm wheelbase frame and essential electronics with a Pixhawk 4 autopilot. The kit is easy to assemble.No soldering needed.
S500 V2 Update:1.Motor:2216 880kv; 2.Propeller 1045; 3.Motor mouts reinforced
- Pixhawk 4 autopilot（PM07 not included）
- Power Management PM02（Assembled）
- ARM adopts high strength plastics
- Motors – 2216 KV920（ V2 Update）
- BLHeli S ESC 20A
- Propeller 1045（ V2 Update）
- Pixhawk4 GPS
- Fully assembled Power Management Board with ESCs
- 433MHz Telemetry Radio / 915MHz Telemetry Radio
- Power and Radio Cables
- Battery Straps
- Dimensions:383*385*240mm
- Wheelbase:480mm
- Weight:935g
Research 3D printer
| Build volume | 250 x 210 x 210 mm | 9.84 x 8.3 x 8.3 in |
| Layer height | 0.05 – 0.35 mm |
| Extruder | Direct drive |
| LCD screen | Monochromatic LCD |
| Filament diameter | 1.75mm |
| Nozzle diameter | 0.4mm (default) / other nozzle diameters supported |
| Power supply | 240W |
High Performance Computing
Product Description
- Ryzen 9 5950x 16 cores 32 threads 4.8 GHz
- XPG D41 RGB RAM 3200 MHz 64 GB (16*4)
- 1 TB NVMe SSD Samsung 3DNAND
- RTX 3080 Nvidia Geforce
- Gamemax Brufen C1
- Gigabyte P850 GM 80 plus GOLD
- Icechill 249 mm A10 Liquid Cooler
- ASUS ROG STRIX 8550 Motherboard
Jetson nano AI Bot
Product Description
| GPU | 128-core Maxwell |
| CPU | Quad-core ARM A57 @ 1.43 GHz |
| Memory | 4 GB 64-bit LPDDR4 25.6 GB/s |
| Storage | microSD (not included) |
| Video Encode | 4K @ 30 | 4x 1080p @ 30 | 9x 720p @ 30 (H.264/H.265) |
| Video Decode | 4K @ 60 | 2x 4K @ 30 | 8x 1080p @ 30 | 18x 720p @ 30 (H.264/H.265) |
| Camera | 2x MIPI CSI-2 DPHY lanes |
| Connectivity | Gigabit Ethernet, M.2 Key E |
| Display | HDMI and display port |
| USB | 4x USB 3.0, USB 2.0 Micro-B |
| Others | GPIO, I2C, I2S, SPI, UART |
| Mechanical | 69 mm x 45 mm, 260-pin edge connector |
Occulus Quest 2
Product Description
- Product Dimensions: 191.5 mm x 102 mm x 142.5 mm (strap folded in), 191.5 mm x102 mm x 295.5 mm (strap fully opened up)
- Product Weight: 503g
- Tracking: Supports 6 degrees of freedom head and hand tracking through integrated Oculus Insight technology.
- Storage: 64GB or 256GB
- Display Panel: Fast-switch LCD
- Display Resolution: 1832×1920 per eye
- Display Refresh: 72Hz at launch; 90Hz support to come
- SoC: Qualcomm® Snapdragon™ XR2 Platform
- Audio: Integrated speakers and microphone; also compatible with 3.5mm headphones.
- RAM: 6G
Occulus Quest 2
Product Description
| Printing Technology | MEM (Melted Extrusion Modelling) |
| Extruder | Single |
| Nozzle Diameter | 0.2mm, 0.4mm, 0.6mm, and 0.5mm (TPU) |
| Extruder Maximum Temperature | 299℃ |
| Extruder Maximum Travel Speed | 200 mm/sec |
| XYZ Accuracy | 7, 7, 1.5 micron |
| Connectivity | USB Cable, Wi-Fi, LAN and USB Stick |
| Display | 4.3″ Full Colored LCD Touchscreen |
| Build Volume | 205 × 255 × 225 mm (8″ x 10″ x8.8″)（XYZ） |
| Printed Object Accuracy | ±0.1mm/100mm |
| Layer Resolution | 0.05/0.1/0.15/0.2/0.25/0.3/0.35/0.4mm |